ICS 2205: Air-Cooled Immersion Cooling System


Direct liquid-to-air cooling for data centers, cryptocurrency, and other high performance computing systems

Single phase direct air cooling of dielectric fluids is most efficiently done with dry coolers. Simply pump the dielectric fluid outside to a dry cooler and let ambient air cool the fluid. Dry Coolers, Inc. offers fluid coolers in our AquaVent AVR Air-Cooled Heat Exchanger series from 21 kW up to 100 kW cooling capacity.

See our AquaVent AVI Air-Cooled Heat Exchanger series for higher kW loads.


  • Direct drive aluminum fan
  • Single speed fan motor 1/3 HP or 1 HP 1070 RPM ODP
  • Copper tubes with aluminum fins
  • Copper tube stub connections
  • Galvanized plenum
  • Vertical air flow (horizontal air flow available)
  • 230 volt / 1 phase / 60 Hertz control package with disconnect switch
  • Integral controls with fan and pump contactor and fusing
  • Temperature control of fan motor
  • Stainless steel pump included (ships loose for mounting indoors near tank)
  • Weather proof for outdoor location


  • Based on dielectric fluid at 140oF/60oC inlet and 95oF/35oC air at sea level
  • Voltage: 230V / 1 phase / 60 Hertz
  • Estimated 60 dBA noise level at 30 feet
  • Dry cooler suitable for outdoor use